smWSP-ARD: Arduino Compatible Rapid Prototyping Platform

$53.10 – $59.00

99 in stock (can be backordered)

Sensor Maestros is the original inventor of the Rapid Prototyping Platform. Loads of thought and planning was put into the design of the smWSP-ARD. The smWSP-ARD is a Rapid Prototyping Platform for BLE and Sensor development. The smWSP-ARD has been designed to precisely mate with the Nordic nRF52 DK and is compatible with Ardiuno Revision 3. It can be used as a shield with Arduino Revision 3 compatible boards such as the nRF52 DK or as a Stand-alone BLE Sensor development kit with the addition of the smRF-LR832 Long Range modules based on the nRF52832 that provide up to +21dBm output power.

For orders over 100 fill out this form.

DOCUMENTS

Hardware

User Manual

Discount per Quantity

Quantity 12 - 56 - 1011 - 1516 - 3535 +
Discount 0%3%5%8%10%10%
Price $59.00$57.23$56.05$54.28$53.10$53.10

99 in stock (can be backordered)

SKU: RPP-ARD-00-00 Category:

Description

Arduino Compatible Wireless Sensor Rapid Prototype Platform

The smWSP-ARD supports all Sensor Maestros smMEM, smSENSR, smMOTN, smCOM, smBAT, and smPWR breakout boards that plug directly into the smWSP-ARD using smBLOCKs to quickly plug in these pin compatible design components making it simple to swap in/out numerous different wireless, sensor, memory, and power configurations to completely customize your system and then just as easy to completely change it a day later. Gone are the days of having to work with a sensor evaluation board that has several sensors you would love to change but they are soldered directly to the PCB. Now you can pick and choose your RF, sensor, memory, power, and battery configuration. Secondarily all these components can then be un-plugged from the smWSP-ARD to be either used in a prototype of your own, in a bread-board application, or simply be replaced by a different smBLOCK compatible component.

  • 4 I2C smBLOCKs: Can be used with any smSENSR and smMOTN products
  • 1 SPI smBLOCK: Can be used with SPI compatible smMOTN, smSENSR, and all smMEM products
  • 1 USB-UART smBLOCK: Can be used with any smCOM products(smCOM-FT230).
  • 1 RF smBLOCK: Can be used with any smRF nRF52 based products such as the smRF-LR832.
  • 1 Power smBLOCK: Optional smPWR DC/DC and/or Linear Regulator products to provide Voltage regulation from LiPO, AA, AAA, or external Voltage Source.
  • Arduino/nRF52 DK Compatible
  • Rapid Prototype: 4 I2C smBLOCKS, 1 SPI smBLOCK
  • Supports up to 5 sensors, or 4 sensors + 1 Serial Flash
  • 1 smCOM BLOCK for USB-UART support
  • DIP Switch to enabled individual Interrupt pins for each smBLOCK
  • DIP Switch connect SPI pins to smBLOCK SPI
  • Compatible with all smMEM, smSENSR, smMOTN, smCOM, smPWR, and smRF-nRF52 plugins
  • 99.1×63.5mm(3.9×2.5”)
  • 1.25mm Battery connector
  • CR2032 Coin Cell Holder(bottom of PCB)
  • smPWR-MP2148 DC/DC converter plugin for 3.3V/1.8V regulation from LiPO
  • Can be used as a nRF52/Arduino Shield to Rapid Prototype Sensor applications
  • smRF-LR832(nRF52 +21dBm Long Range Module) development platform. Other smRF options.
  • smRF-LR832 can be programmed via nRF52 DK or external J-LINK via SWD Connector.

Growing family of plugins Sensors(smSENSR), Power(smPWR), Battery(smBAT), Motion
Sensors(smMOTN), USB-UART(smCOM), and RF Radios(smRF) and Demonstration software to tie everything together.

Additional information

Weight 0.050 kg
Dimensions 100 × 70 × 12 mm

Title

Go to Top