Description

smMOTN-BMI160 : 6-DOF 6-AXIS BMI160 Breakout

The smMOTN-BMI160 provides an ultra-small form factor evaluation board for the BMI160 to easily incorporate into prototypes or wire into MCU/SOC evaluation kits. Or even solder directly into a prototype system.

BMI160 Datasheet:  BMI 160 Datasheet
BMI160 Firmware Drivers:  BMI160 Firmware Drivers – Github
Bosch Sensor Fusion Library:  Bosch Sensor Fusion Library

BMI160 Features

• BMI160: 2.5×3.0x0.83mm 6-Axis IMU
• VDD = 1.71-3.6V, VDDIO = 1.2-3.6V
• 16bit Accelerometer and Gyroscope
• 925uA Full Operation ACCEL & GYRO
• 3uA SLEEP Mode ACCEL & GYRO
• 1024 Byte FIFO / 0.75s of Data Capture
• Gyro: ±125, 250, 500, 1000, 2000°/sec
  • 850/8uA Full Rate/SLEEP
  • 1 %FS Nonlinearity
  • ±3 °/s Zero-Rate Offset
  • 25-3000Hz ODR
• Accel: ±2, 4, 8, 16g
  • 180/20uA Normal/Low Power Mode
  • ±40mg Zero-G Offset Soldered
  • 180ug / √Hz Output Noise
  • 5-1600Hz ODR
• Timestamped Output with 39us Resolution
• Internal Step, Tap, Orientation, Flat, Low-g/High-g, No/Slow-Motion Algorithms built in
• 2 Configurable GPIO Interrupt lines
• Select between I2C/SPI interfaces
  • Secondary I2C Master or Slave OIS Interface
• Self-Test for Accel, Gyro, Mag
• Internal Temperature Sensor
• 10,000G Max Mechanical Shock

smMOTN-BMI160 Features:

• 12.6 x 12.6mm(0.5×0.5”) Breakout board
• 2.54mm(0.1”) headers on 10.16mm(0.4”) spacing
• Compatible with Sensor Maestros Rapid Development IoT Platforms!!
  • smWSP-ARD => Arduino Compatible Shield
    
  • smWSP => Silicon Labs EFM32 / EFR32 Starter Kit Compatible

COMING SOON!!

• 6-Axis Sensor Fusion Source Code Example with smWSP-ARD Wireless Sensor Rapid Prototyping Kit.
• Use with Sensor Maestros SENSR-LOGR Mobile App for configuration, data-logging, 3D View