- 12.6 x 12.6mm
- I2C or SPI Configurable (Default I2C)
- All BMI160 Pins Mapped Out
- Secondary I2C Master and OIS Slave Ports accessible through Vias 1-4
- Compatible with Sensor Maestros Rapid Development IoT Platforms
- smWSP-ARD => Arduino Compatible Shield
- smWSP => Compatible with Silicon Labs EFM32 and EFR32 Starter Kits
-
smMOTN-BMI160 : 6-DOF 6-AXIS BMI160 Breakout
-
The smMOTN-MMA8652 is a 3-Axis Accelerometer MMA8652 breakoutboard. The MMA8652 is an ultra-small 3-Axis, 12-bit I2C Accelerometer. It comes in a 2x2mm 10pin DFN package. It is one of the most cost-effective 3-Axis accelerometers on the market and is loaded with features. It is operational from 1.95-3.6V and the I2C interface can operate from a separate 1.62-3.6V if desired. It features ultra-low power consumption in which it can operate at 6.5uA in its lowest power settings. It features ±2, ±4, and ±8g dynamically selectable full-scale ranges. Output Data Rates range from 1.56-800Hz and provides a 12-bit I2C output. It features 2 programmable interrupts that can be connected to an external MCU. It features 4 channels of configurable motion detection(FreeFall, Motion, Pulse, and Transient). It provides orientation detection(Potrait/Landscape) with programmable hysteresis. To assist with ultra-low power operation it provides configurable automatic ODR changed triggered by the Auto-Wake/Sleep state change. It also features a 32-sample FIFO and a Self-Test feature. The smMOTN-MMA8652 provides an easy to use, low-cost, very small breakoutboard for the MMA8652. All pins are all mapped to standard 2.54mm/0.1” headers. This allows for use in a standard bread-board or to be ‘wired’ into an application. The header-header spacing is 7.62mm (300mil). All SMSTRS smMEM, smSENSR, smCOM, smBAT, smPWR products are compatible with the Sensor Maestros Wireless Sensor Platforms that provide Rapid prototyping for Sensor and BTLE applications. The smMOTN-MMA8652 can be plugged into the smBLOCK I2C sockets in the smWSP and smWSP-ARD rapid prototyping sensor plugin boards. For orders over 100 fill out this form.
-
The smMOTN-10 DOF IMU Breakout Board is a 10 DOF IMU that provides complete 9 DOF IMU capability, 3-Axis Accel, 3-Axis Gyro, 3-Axis Mag and also includes a precision pressure sensor all in a Micro-Sized Breakout board measuring a mere 15.2mm x 12.7mm. The smMOTN-10 DOF IMU Breakout Board is in a smBLOCK SPI compatible pinout so it can be used with the smWSP-ARD or smWSP Rapid Prototyping Wireless Sensor Platforms.
- LSM6DSO(3-Axis Accel + 3-Axis Gyro), LIS2DML(3-Axis Mag), LPS22HH(260-1260 Absolute Pressure Sensor)
- ±2/±4/±8/±16 g full scale
- ±125/±250/±500/±1000/±2000 dps full scale
- ±50 Guass
- Max ODR Rates: 1667Hz Accel/Gyro ; 104Hz Mag
- Ultra Small 15.2 x 12.7mm
- Configurable between I2C and SPI interfaces without having to remove resistors!!
- Default = SPI to LSM6DSO
- All sensors can be controlled via single I2C or SPI Interface to the LSM6DSO
- smBLOCK SPI Pinout allows for plugin compatibility with smWSP-ARD and smWSP(SiLabs EFM/EFR Compatible)
- Sensor Fusion Firmware Example with BLE and USB interface below. Works with SENSR-LOGR Mobile App.
-
The smSENSR-LTR303ALS light sensor is a smBLOCK form factor breakout board for the LTR-303ALS-01 Light Sensor from LiteOn. smBLOCK breakout boards can be plugged into smBLOCK locations on the Sensor Maestros smWSP-ARD and smWSP Wireless Sensor platforms. The LTR-303ALS-01 light sensor is a very cost-effective 16bit light sensor in a 2x2 6LD DFN package.
- 2.4-3.6V Operation / 1.7-3.6V IO Operation
- I2C 400kbs / 16bit Resolution
- 0.01 – 64K Lux Dynamic Range(1x,2x,4x,8x,48x,96x Gain settings)
- Programmable Interrupt Pin
- 50/60Hz Rejection, IR/UV Light Immunity
- 220uA operation, 5uA Standby/SLEEP
- smBLOCK I2C Pinout allows plugin compatibility with smWSP-ARD and smWSP(Silicon Labs EFM/EFR Compatible)
- Ultra-small 10x8mm Breakout Board
- 2.54mm(0.1”) headers on 7.62mm(0.3”) spacing
- Indoor Air Quality Application: IAQ-LOGR/smWSP-ARD
-
The Silicon Labs Si7006-A20 is an I2C interface, ultra-small, Temperature and Humidity Combination IC. It is offered in a 3x3x0.75mm DFN-6 package. The Si7006-A20 provides 0-90% RH with an Accuracy of +5% (max). It is operational from 0-100% RH. The Humidity sensor is configurable from 8-12bits with conversion times from 2.6-10ms respectively. The SI7006-A20 incorporates a ‘heater’ element to aid in testing the sensor, to dry the sensor membrane, or to implement a dew-point. For orders over 100 fill out this form.
-
Sale!SPRING 2024 SUNRISE CO2 SENSOR SALE!! The SenseAir Sunrise is one of the world's lowest power and fully calibrated direct measurement CO2. As a matter of fact the Sunrise has as low as 45uA average current enabling it to be used in battery operated systems. On top of that it comes fully calibrated and provides for an automated re-calibration that has a user defined interval. Another key point is the Sunrise also has both a UART and I2C interface providing for a simple hardware and firmware interface. FREE SHIPPING FOR USA!! LOW COST INTERNATIONAL SHIPPING!! Check out the Sensor Maestros IAQ-LOGR Indoor Air Quality Reference Design!! IAQ-LOGR Product Brief_Sunrise
- CO2, Temperature, Humidity, Ambient Light Monitoring
- Ultra-Low Power Beacon Mode Operation 60uA / >5yr Battery Life with 2 AA batteries
- Configurable Beacon Transmit and Sensor Sampling Intervals
- High/Low User Configurable Alarms
- Automated Data-logging to on-board memory can be enabled
- iOS/Android Mobile App for easy configuration and real-time graphing
- Log Data to CSV file or Cloud Database
- Field Firmware Update via BLE interface
- Optional Long Range BLE Capability >1000m range
- OEM Customizable