-
The smACCEL-H3LIS331DL breakout board features the H3LIS331DL 400G 3-Axis Accelerometer on a micro-sized 12.7x15.2mm breakout board. The H3LIS331DL high-g accelerometer can be configured for 100G, 200G, or 400G Full Scale operation. It can be configured for a SPI or I2C interface. Sensor Maestros has expertise in precision motion tracking. We have developed numerous products in this area including the Wearable Precision 9 DOF IMU SFM2 and additionally the FAZR PUCK a first of its kind hockey puck that measures shot speed and provides user feedback via built-in LED's. We have also developed a LAX ball using the same technology. Let us know what we can develop for you or if you have interest in licensing our technology. DESIGN SERVICES INQUIRY -
Sensor Maestros developed the smMOTN-10 DOF-ST-LSM6DSV32 IMU Breakout Board to provide 9 DOF IMU capability. We also included a LPS22HH pressure sensor. Equally important we designed it to measure a mere 15.2mm x 12.7mm . The LSM6DSV32 utilizes a single SPI interface and directly interfaces to the LIS2MDL 3-Axis Magnetometer and LPS22HH pressure sensor. Sensor Maestros also designed this breakout board to be compatible with the smWSP-ARD and smWSP Rapid Prototyping Platforms. We developed these boards as Arduino and SiLabs EFR32 and EFM32 STK compatible.- LSM6DSV32(3-Axis Accel & Gyro), LIS2DML(3-Axis Mag), LPS22HH(260-1260 Pressure Sensor)
-
The SenseAir Sunrise CO2 Sensor is one of the world's lowest power and fully calibrated direct measurement CO2 Sensor. As low as 45uA average current enabling it to be used in battery operated systems. The Sunrise CO2 Sensor comes fully calibrated and provides for an automated re-calibration that has a user defined interval. UART and I2C Interfaces. FREE SHIPPING FOR USA!! LOW COST INTERNATIONAL SHIPPING!! Sunrise CO2 Sensor used in the Open Source IAQ-LOGR Indoor Air Quality Reference Design. -
Sensor Maestros developed the smMOTN-10 DOF-ST-LSM6DSO IMU Breakout Board to provide 9 DOF IMU capability. We also included a LPS22HH pressure sensor. Equally important we designed it to measure a mere 15.2mm x 12.7mm . The LSM6DSO utilizes a single SPI interface and directly interfaces to the LIS2MDL 3-Axis Magnetometer and LPS22HH pressure sensor. Sensor Maestros also designed this breakout board to be compatible with the smWSP-ARD and smWSP Rapid Prototyping Platforms. We developed these boards as Arduino and SiLabs EFR32 and EFM32 STK compatible.
- LSM6DSO(3-Axis Accel & Gyro), LIS2DML(3-Axis Mag), LPS22HH(260-1260 Pressure Sensor)
-
smMOTN-BMI160 : 6-DOF BMI160 IMU Breakout- 12.6 x 12.6mm
- I2C or SPI Configurable (Default I2C)
- All BMI160 Pins Mapped Out
- Secondary I2C Master and OIS Slave Ports accessible through Vias 1-4
- Compatible with Sensor Maestros Rapid Development IoT Platforms
- smWSP-ARD => Arduino Compatible Shield
- smWSP => Compatible with Silicon Labs EFM32 and EFR32 Starter Kits
-
The IAQ-LOGR is an Open Source Wireless Indoor Air Quality Monitor and Data Logger. The IAQ-LOGR application firmware interfaces and data logs the following sensors: Temperature, Humidity, Ambient Light, and CO2. The kit is available in 2 Primary options: BASE OPTION requires a nRF52 or nRF52840 DK. The STAND-ALONE OPTION includes a Long Range BLE Module and does not require any additional boards. The kit is also available with either a Cubic CM1106-SL or a Senseair Sunrise CO2 Sensor. Please select your options below. -
The Silicon Labs Si7006-A20 is an I2C interface, ultra-small, Temperature and Humidity Combination IC. It is offered in a 3x3x0.75mm DFN-6 package. The Si7006-A20 provides 0-90% RH with an Accuracy of +5% (max). It is operational from 0-100% RH. The Humidity sensor is configurable from 8-12bits with conversion times from 2.6-10ms respectively. The SI7006-A20 incorporates a ‘heater’ element to aid in testing the sensor, to dry the sensor membrane, or to implement a dew-point. For orders over 100 fill out this form. -
The smSENSR-LTR303ALS light sensor is a smBLOCK form factor breakout board for the LTR-303ALS-01 Light Sensor from LiteOn. smBLOCK breakout boards can be plugged into smBLOCK locations on the Sensor Maestros smWSP-ARD and smWSP Wireless Sensor platforms. The LTR-303ALS-01 light sensor is a very cost-effective 16bit light sensor in a 2x2 6LD DFN package.- 2.4-3.6V Operation / 1.7-3.6V IO Operation
- I2C 400kbs / 16bit Resolution
- 0.01 – 64K Lux Dynamic Range(1x,2x,4x,8x,48x,96x Gain settings)
- Programmable Interrupt Pin
- 50/60Hz Rejection, IR/UV Light Immunity
- 220uA operation, 5uA Standby/SLEEP
- smBLOCK I2C Pinout allows plugin compatibility with smWSP-ARD and smWSP(Silicon Labs EFM/EFR Compatible)
- Ultra-small 10x8mm Breakout Board
- 2.54mm(0.1”) headers on 7.62mm(0.3”) spacing
- Indoor Air Quality Application: IAQ-LOGR/smWSP-ARD
-
The smMOTN-MMA8652 is a 3-Axis Accelerometer MMA8652 breakoutboard. The MMA8652 is an ultra-small 3-Axis, 12-bit I2C Accelerometer. It comes in a 2x2mm 10pin DFN package. It is one of the most cost-effective 3-Axis accelerometers on the market and is loaded with features. It is operational from 1.95-3.6V and the I2C interface can operate from a separate 1.62-3.6V if desired. It features ultra-low power consumption in which it can operate at 6.5uA in its lowest power settings. It features ±2, ±4, and ±8g dynamically selectable full-scale ranges. Output Data Rates range from 1.56-800Hz and provides a 12-bit I2C output. It features 2 programmable interrupts that can be connected to an external MCU. It features 4 channels of configurable motion detection(FreeFall, Motion, Pulse, and Transient). It provides orientation detection(Potrait/Landscape) with programmable hysteresis. To assist with ultra-low power operation it provides configurable automatic ODR changed triggered by the Auto-Wake/Sleep state change. It also features a 32-sample FIFO and a Self-Test feature. The smMOTN-MMA8652 provides an easy to use, low-cost, very small breakoutboard for the MMA8652. All pins are all mapped to standard 2.54mm/0.1” headers. This allows for use in a standard bread-board or to be ‘wired’ into an application. The header-header spacing is 7.62mm (300mil). All SMSTRS smMEM, smSENSR, smCOM, smBAT, smPWR products are compatible with the Sensor Maestros Wireless Sensor Platforms that provide Rapid prototyping for Sensor and BTLE applications. The smMOTN-MMA8652 can be plugged into the smBLOCK I2C sockets in the smWSP and smWSP-ARD rapid prototyping sensor plugin boards. For orders over 100 fill out this form.
