-
The smACCEL-H3LIS331DL breakout board features the H3LIS331DL 400G 3-Axis Accelerometer on a micro-sized 12.7x15.2mm breakout board. The H3LIS331DL high-g accelerometer can be configured for 100G, 200G, or 400G Full Scale operation. It can be configured for a SPI or I2C interface. Sensor Maestros has expertise in precision motion tracking. We have developed numerous products in this area including the Wearable Precision 9 DOF IMU SFM2 and additionally the FAZR PUCK a first of its kind hockey puck that measures shot speed and provides user feedback via built-in LED's. We have also developed a LAX ball using the same technology. Let us know what we can develop for you or if you have interest in licensing our technology. DESIGN SERVICES INQUIRY -
4 PIECE MINIMUM ORDER / CE Certification Document Arduino Nicla Battery 250mAh Arduino Nicla Sense ME, Arduino Nicla Vision Compatible- 22(l) x 20(w) x 7.5(h)mm
- JST ACHR-03V-2 Connector
- Works with all Arduino Nicla and Portena Products
- OV/UV Protection and 10K NTC Thermistor Integrated
-
4 PIECE MINIMUM ORDER / CE Certification Document Arduino Portena Battery 1000mAh Additional Arduino Compatible Products: Nicla Vision Battery, Arduino Portena Battery- 702260 => 22(W) x 60(L) x 7.0(H)mm
- JST ACHR-03V-2 Connector
- Works with all Arduino Nicla and Portena Products
- OV/UV Protection and 10K NTC Thermistor Integrated
-
Sensor Maestros developed the smMOTN-10 DOF-ST-LSM6DSV32 IMU Breakout Board to provide 9 DOF IMU capability. We also included a LPS22HH pressure sensor. Equally important we designed it to measure a mere 15.2mm x 12.7mm . The LSM6DSV32 utilizes a single SPI interface and directly interfaces to the LIS2MDL 3-Axis Magnetometer and LPS22HH pressure sensor. Sensor Maestros also designed this breakout board to be compatible with the smWSP-ARD and smWSP Rapid Prototyping Platforms. We developed these boards as Arduino and SiLabs EFR32 and EFM32 STK compatible.- LSM6DSV32(3-Axis Accel & Gyro), LIS2DML(3-Axis Mag), LPS22HH(260-1260 Pressure Sensor)
-
smWSP-ARP: Wireless Sensor Rapid Prototyping Shield
The smWSP-ARD is a wireless sensor rapid prototyping shield that is Arduino R3 compatible. The smWSP-ARD supports all Sensor Maestros smMEM, smSENSR, smMOTN, smCOM, smBAT, and smPWR standardized pinout breakout boards. These breakout boards plug directly into the smWSP-ARD using smBLOCKs allowing you to rapidly prototype your wireless sensor hardware one day and completely change it the next day. Gone are the days of having to work with a sensor evaluation board that has several sensors you would love to change but they are soldered directly to the PCB. Now you can pick and choose your RF, sensor, memory, power, and battery configuration. Secondarily all these components can then be un-plugged from the smWSP-ARD to be either used in a prototype of your own, in a bread-board application, or simply be replaced by a different smBLOCK compatible component. smWSP-ARD Board Includes: smCOM(USB-UART) and the smWSP-ARD base board.IAQ-LOGR Open Source Wireless Indoor Air Quality Data Logger Application
The IAQ-LOGR is an Open-Source firmware application that implements a Wireless Indoor Air Quality Monitor and Data Logger using the smWSP-ARD base board. The IAQ-LOGR application utilizes the smSENSR, smMEM, and/or smPWR and smRF standardized plugins. The IAQ-LOGR reads and data logs CO2, Temperature, Humidity, and Ambient light using the following breakout boards listed below. Open Source IAQ-LOGR firmware Repository: IAQ-LOGR Firmware More information on the IAQ-LOGR at the following link: IAQ-LOGR Product Page Volume orders please inquire directly. -
The PAM8904 is a 1X/2X/3X Piezo Driver capabable of 1X/2X/3X Boost modes with an input of 1.8-5.5V. The smPWR-PAM8904 provides a micro-sized breakout board measuring 20.4x12.7mm for the PAM8904 and provides jumper pin selections for the 1X/2X/3X modes and oversized solder pads for connecting a piezo speaker/buzzer. Additionally the device has excellent built in features such as Automatic Standby Operation and Wake-Up-Control. Use the Open Source BLE Controllable Firmware and Flutter App to test the smPWM-PAM8904. nRF52/nRF52840 DK BLE Firmware: smPWM_BLE_nRF52 Firmware Flutter App controls DUTY_CYCLE and FREQUENCY: smPWM_BLE-Flutter -
INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! 4 PIECE MINIMUM ORDER / CE Certified Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 630mAh 30(W) x 40(L) x 5.0(H)mm Rechargeable Lithium Polymer Battery
- Arduino Nicla Sense and Portena H7 Compatible Connector JST ACHR-03V-S
- OV/UV Protection Built into battery
- 10K Thermistor Built in, accessible from middle pin on ACHR-03V Connector
- CE Certification Download: CE Certification Document
- For smaller size/capacity Nicla Sense, Portena H7 compatible battery look at the smLiPo-752020 250mAh battery
- For larger size/capacity Nicla Sense. Portena H7 compatible battery look at the smLiPo-702260 1000mAh battery
-
INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! 4 PIECE MINIMUM ORDER / CE Certified Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 400mAh 20(W) x 25(L) x 9.0(H)mm Rechargeable Lithium Polymer Battery
- Comes with JST ACHR-02V-2 ultra-low profile connector.
- OV/UV Protection Built into battery
- CE Certification Document: CE Certification Document
-
4 PIECE MINIMUM ORDER / CE Certification Document Arduino Portena Battery 1000mAh Additional Arduino Compatible Products: Nicla Vision Battery, Arduino Nicla Sense Battery- 702260 => 22(W) x 60(L) x 7.0(H)mm
- JST ACHR-03V-2 Connector
- Works with all Arduino Nicla and Portena Products
- OV/UV Protection Integrated
-
The SenseAir Sunrise CO2 Sensor is one of the world's lowest power and fully calibrated direct measurement CO2 Sensor. As low as 45uA average current enabling it to be used in battery operated systems. The Sunrise CO2 Sensor comes fully calibrated and provides for an automated re-calibration that has a user defined interval. UART and I2C Interfaces. FREE SHIPPING FOR USA!! LOW COST INTERNATIONAL SHIPPING!! Sunrise CO2 Sensor used in the Open Source IAQ-LOGR Indoor Air Quality Reference Design. -
4 PIECE MINIMUM ORDER INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 250mAh 20(W) x 31(L) x 5.2(H)mm Rechargeable Lithium Polymer Battery
- Comes with ultra-low profile JST ACHR-02V-S connector.
- OV/UV Protection Built into battery
- CE Certification Document: CE Certification Document
-
4 PIECE MINIMUM ORDER INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 130mAh 20(W) x 31(L) x 3.3(H)mm Rechargeable Lithium Polymer Battery
- Comes with ultra-low profile JST ACHR-02V-S connector.
- OV/UV Protection Built into battery
- CE Certification Document: CE Certification Document
-
INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! 3 PIECE MINIMUM ORDER / CE Certified Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 1100mAh 34(W) x 50(L) x 6.0(H)mm Rechargeable Lithium Polymer Battery
- Molex 51021-0200 Connector
- OV/UV Protection
- CE Certification Document: CE Certification Document
- <180 mOhm series resistance 1C Max charge/discharge current
-
INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! 3 PIECE MINIMUM ORDER Sensor Maestros specializes in ultra low power product design. Inquire below for custom design services. Design Services Inquiry- 1600mAh Lithium Battery 50(W) x 48(L) x 6.0(H)mm
- Includes JST PHR-2 Connector - Commonly used for Drone Battery and RC products
- OV/UV Protection
- CE Certified!! CE Certification Document
- Ideal for Drone or Remote Control device battery replacement!!
-
INQUIRE FOR VOLUME ORDERS OR OTHER BATTERY SIZES/CAPACITIES!! 4 PIECE MINIMUM ORDER / CE Certified- 180mAh 14(W) x 30(L) x 5.5(H)mm Rechargeable Lithium Polymer Battery
- OV/UV Protection Built into battery
- CE Certification Download: CE Certification Document
-
Sensor Maestros developed the smMOTN-10 DOF-ST-LSM6DSO IMU Breakout Board to provide 9 DOF IMU capability. We also included a LPS22HH pressure sensor. Equally important we designed it to measure a mere 15.2mm x 12.7mm . The LSM6DSO utilizes a single SPI interface and directly interfaces to the LIS2MDL 3-Axis Magnetometer and LPS22HH pressure sensor. Sensor Maestros also designed this breakout board to be compatible with the smWSP-ARD and smWSP Rapid Prototyping Platforms. We developed these boards as Arduino and SiLabs EFR32 and EFM32 STK compatible.
- LSM6DSO(3-Axis Accel & Gyro), LIS2DML(3-Axis Mag), LPS22HH(260-1260 Pressure Sensor)
-
smMOTN-BMI160 : 6-DOF BMI160 IMU Breakout- 12.6 x 12.6mm
- I2C or SPI Configurable (Default I2C)
- All BMI160 Pins Mapped Out
- Secondary I2C Master and OIS Slave Ports accessible through Vias 1-4
- Compatible with Sensor Maestros Rapid Development IoT Platforms
- smWSP-ARD => Arduino Compatible Shield
- smWSP => Compatible with Silicon Labs EFM32 and EFR32 Starter Kits
-
Sensor Maestros developed the SFM2 9 DOF Wearable IMU to allow users to capture 2D and 3D movement data. This 9 DOF IMU is a wearable show-casing High Performance and Low Power Operation. In addition the SFM2 9 DOF IMU can be attached to whatever you want to monitor via velcro straps. The SFM2 provides Sensor Fusion outputs in addition to Pressure/Altitude and Temperature, Humidity data. Our team also developed the SENSR-LOGR mobile app to make configuration easy and simple. Having all this functionality in the SFM2 9 DOF IMU there are all sorts of projects and applications that the SFM2 can be used for. Performance packed, the SFM2 provides up to 833Hz Sensor Fusion with configurable Oversampling rate. Pro Performance features we included is the ability to synchronize and use multiple SFM2's simultaneously. All data is precision time-stamped. Android App v8.5.2 LINK => Install the Android v8.5.2.apk . We are nearing completion of an updated Flutter version of the App that will get posted to Google Play. iOS App is in the App Store COMING SOON => Streaming Audio from SFM2 to the Mobile App!! Sensor Maestros has extensive experience with Sensor Fusion and embedded product development. An example of this expertise can be seen at the FAZR PUCK PRODUCT PAGE. The FAZR PUCK is a Smart Hockey puck that automatically detects shots, calculates the shot speed and provides immediate visual feedback by the built in LED's. DESIGN SERVICES, PRICING, OEM INQUIRY FORM -
The IAQ-LOGR is an Open Source Wireless Indoor Air Quality Monitor and Data Logger. The IAQ-LOGR application firmware interfaces and data logs the following sensors: Temperature, Humidity, Ambient Light, and CO2. The kit is available in 2 Primary options: BASE OPTION requires a nRF52 or nRF52840 DK. The STAND-ALONE OPTION includes a Long Range BLE Module and does not require any additional boards. The kit is also available with either a Cubic CM1106-SL or a Senseair Sunrise CO2 Sensor. Please select your options below.
